Why doesn't the drawer close? ? There can be several reasons, and in today's article we will try to describe each of them, which will help solve this annoying problem. Often it's just a small thing that can be fixed in no time. However, in the worst case scenario, it may turn out that a specific mechanism or even the entire piece of furniture is suitable for replacement, or it may be necessary to seek the help of a specialist. What to do if the drawer doesn't closes on its own before we take radical measures? Use our tips!
Why doesn't the drawer close?
What to do if the drawer doesn't close ? Before acting, it is necessary to know the cause of the problem, because without it you will not move. Carefully inspect each element, including the bottom, interior and the entire mechanism - perhaps during the analysis you will find out what the problem is.
Why doesn't the drawer close? The reason may be:
- incorrect arrangement of items stored inside, which can block the mechanism,
- extended drawer base with special slots,
- too much load on the drawer,
- poorly tightened screws,
- more relaxed Drawer pull-out mechanism ,
- Drawer inserted incorrectly into the guides,
- incorrect leveling of the guides,
- uneven ground on which the furniture stands,
- worn or damaged guides.
If you already know the causes of the problem, be sure to find out more about it what you use for wooden drawers You also have to lubricate newly purchased furniture so that the problem doesn't reoccur. You can find information about this in the following paragraph. 
How can you counteract this - what to lubricate wooden drawers with?
The pull-out mechanism sometimes requires proper maintenance to keep it running smoothly. So with what Lubricate wooden drawers ? To avoid jamming and ensure smooth sliding of the guides, it is usually enough to lubricate them with soap or colorless candle wax. We usually have at least one of these products at home so you can act immediately.
If the cause of the problem is not jammed guides, but wood swollen from moisture or warped sidewalls, you can try to level their surface by planing the lower edges, taking into account the grain. You can also use a sander or sandpaper with the appropriate grit. Applying these tips should help and give you joy in a well-functioning piece of furniture again. We hope that our article has cleared up all doubts and you now know exactly What to do if the drawer doesn't close .
